BUYNOW

Our laptop skins are vinyl based with an adhesive layer on the underside. The skins by Ladecor are easy to apply or remove as you please without thinking about any glue stains or residual marks on your laptop. A layer of lamination over high-grade vinyl with the most advanced printing technology helps us achieve very bright and realistic prints.

Applying Instructions:

1. Make sure your laptop is CLEAN. Wipe it off with a soft cloth. The laptop should be free of dust, fat or grease - otherwise, the laptop skin may not stick to your laptop as well as it's supposed to.

2. Take the MEASUREMENT of the applying area.

3. TRIM the exact size before applying with a blade/scissors.

4. Align the laptop skin on your laptop, take care that you put it on straight, and in the exact position that you want to place it.

5. Remove ONLY ONE side of the liner from the vinyl sheet, align to the applying surface and start attaching them SLOWLY.

6. Proceed carefully with the use of a clean cloth and/or a plastic card (i.e. ATM card) to assure minimal/ no AIR BUBBLES remain until the liner is removed.

7. Finished just check out your laptop from the front and FEEL the difference.